ARDUINO MKR IOT BUNDLE, ARDUINO GKX00006

The MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform. The MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments.The kit is based around the MKR1000—a powerful board that combines the functionality of the Zero and the Wi-Fi Shield—and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes: 

• 1 Arduino MKR1000 board, with header soldered.
• 1 micro USB cable, 
• 1 400-point breadboard, 
• 70 solid-core jumper wires, 
• 1 9V battery snap, 
• 1 stranded jumper wire 
• 1 stranded jumper wire,
• 6 phototransistors, 
• 3 potentiometers (10 kilohm), 
• 10 pushbuttons, 
• 1 temperature sensor (TMP36), 
• 1 tilt sensor, 
• 1 alphanumeric LCD (16 x 2 characters), 
• 1 bright white, 
• 34 LEDs (6 ldr bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue), 
• 1 small DC motor (6/9V), 
• 1 small servo motor, 
• 1 piezo capsule (PKM17EPP-4001-B0), 
• 1 H-bridge motor driver (L293D), 
• 1 octocouplers (4NE5), 
• 2 MOSFET transistors (IRF520), 
• 5 capacitors (100uF),
• 5 diodes (1N4007), 
• 3 transparent gels (R,G,B)
• 1 male pin strip (40 x 1), 
• 20 resistors (220 ohm), 
• 5 resistors (560 ohm), 
• 5 resistors (1 kilohm), 
• 5 resistors (4.7 kilohm), 
• 20 resistors (10 kilohm), 
• 5 resistors (1 megohm), 
• 5 resistors (10 megohm)

NOTE: don't connect 9V to the board, as it will be damaged. You can use the 9v Battery strip to supply an external component.