Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger.
Tehnical specification
Operating Voltage | 3.3V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limit) | 6-16V |
Analog Input Pins | 6 |
Analog Output Pins | 1 |
Digital I/O Pins | 14 |
DC Current for 3.3V Pin | 700 mA |
DC Current for 5V Pin | 00 mA |
Length | 68.6 mm |
Width | 53.4 mm |
Weight | 24 g |
All the pins on the MKR2UNO Adapter are wired one to one from the MKR to the UNO form factor with some exception:
MKR form factor pin | UNO form factor pin |
0 | 13 |
1 | 10 |
13 | 0 |
14 | 1 |