Filtri

Kategorije

  • ARDUINO
  • SENZORJI
  • DEV. BOARDS
  • PROTOTYPING

Zadnje ogledano

SEEED STUDIO

1 pin female-female jumper wire 100mm 50pcs pack    ...

ID-Nummer: 326/5
Auf Lager: JA
Marke: SEEED STUDIO
7,84 €

A geek style monitor for embedded computer system, consists of a 10.1 inches TFT-LCD and a driver board.    The driver board is mainly to meet the specialized needs of the market and the development of small size, versatile, wide industrial...

ID-Nummer: 487/
Auf Lager: NEIN
Lieferung: 10 Tage
Marke: SEEED STUDIO
92,45 €

Please read through the guide in Shenzhen 2 U before making any purchase in this catalogue.   This is a lovely momentary push button pack for your dash board or control panel. Each pack contains a set of six 12 mm colored domed push buttons. The...

ID-Nummer: 834/9
Auf Lager: JA
Marke: SEEED STUDIO
4,33 €

Please read through the guide in Shenzhen 2 U before making any purchase in this catalogue.   23A Battery is an ideal power for projects that have strict volume requirement, because of its mini size and high capacity. Many products, like camera,...

ID-Nummer: 844/35
Auf Lager: JA
Marke: SEEED STUDIO
0,71 €

Introduction: This Motor Drill mainly used for PCB and other plastic sheet drilling, the chuck suitable for 1~1.2mm diameter drill. it"s small size and low nosie, easy to use .   Specifications: - Work Voltage: DC 12V - No load speed: 13...

ID-Nummer: 695/
Auf Lager: NEIN
Lieferung: ? Tage
Marke: SEEED STUDIO
5,54 €

This is a refined metal push button with polished stainless surface and silver as contact material. It takes screw terminals as connectors so that it’s easy to be assembled or removed on a project without soldering.   Features - Shiny poli...

ID-Nummer: 386/
Auf Lager: NEIN
Lieferung: 10 Tage
Marke: SEEED STUDIO
4,23 €

This is a refined metal push button with polished stainless surface and silver as contact material. It takes screw terminals as connectors so that it’s easy to be assembled or removed on a project without soldering.     Features - Shi...

ID-Nummer: 405/9
Auf Lager: NEIN
Lieferung: 10 Tage
Marke: SEEED STUDIO
4,75 €

This is a refined metal push button with polished stainless surface and silver as contact material. It takes screw terminals as connectors so that it’s easy to be assembled or removed on a project without soldering.     Features - Shi...

ID-Nummer: 406/9
Auf Lager: JA, 7 Stk.
Marke: SEEED STUDIO
4,70 €
ID-Nummer: 835/9
Auf Lager: JA
Marke: SEEED STUDIO
9,13 €
ID-Nummer: 837/9
Auf Lager: JA
Marke: SEEED STUDIO
9,13 €
ID-Nummer: 836/9
Auf Lager: JA
Marke: SEEED STUDIO
9,13 €

This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which m...

ID-Nummer: 331/35
Auf Lager: JA
Marke: SEEED STUDIO
5,31 €

  This is a 3V battery holder with On/Off Switch and a lead pre-attached. You can use 2 AA battery of 3.0V using alkaline batteries or 2.4V using NiCD/NiMH rechargeable battery.   Battery not included.   Specifications - Materials: pla...

ID-Nummer: 847/35
Auf Lager: JA
Marke: SEEED STUDIO
0,84 €

This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which m...

ID-Nummer: 330/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
13,36 €

This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which m...

ID-Nummer: 838/
Auf Lager: JA
Marke: SEEED STUDIO
16,76 €

4 pin 2.54mm to 2.0mm Female jumper wire, 100mm per PC, 5 PC / Pack.   Note: Color might change due to different batches....

ID-Nummer: 601/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
3,78 €

    The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Arduino/Seeeduino board, control...

ID-Nummer: 493/
Auf Lager: JA
Marke: SEEED STUDIO
54,02 €

This is a battery holder with 150mm long wire. You can use AA-sized Alkaline or Rechargeable batteries with it. Batteries are not included....

ID-Nummer: 843/35
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
2,11 €

    This adapter consists of a 9V battery clip and a standard 5.5*2.1mm center positive barrel jack, it applied to power any device needs 9V input voltage and has on-board barrel jack....

ID-Nummer: 1561/35
Auf Lager: JA
Marke: SEEED STUDIO
0,67 €

    MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity and fast response to alcohol, suitable for portable alcohol detector.      Features:   - High sensitivity - Fast response and resum...

ID-Nummer: 460/10
Auf Lager: JA
Marke: SEEED STUDIO
7,72 €
ID-Nummer: 466/
Auf Lager: NEIN
Lieferung: 14 Tage
Marke: SEEED STUDIO
3,07 €

Arduino is a massive ecosystem, if there"s a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for th...

ID-Nummer: 530/23
Auf Lager: JA
Marke: SEEED STUDIO
38,06 €

    - Compatible with lots of Arduino board - Rich grove connectors - Same pinout as Arduino Uno R3 - Selectable voltage - PDF guidance for grove users     Description:   Arduino Uno is the most popular Arduino board so far, ...

ID-Nummer: 1599/29
Auf Lager: JA
Marke: SEEED STUDIO
11,96 €

Bluetooth Shield integrates a Serial Bluetooth module. It can be easily used with Arduino/Seeedstudio for transparent wireless serial communication.   Features: - Seeeduino/Arduino compatible - Up to10m communication distance in house without ob...

ID-Nummer: 544/29
Auf Lager: JA
Marke: SEEED STUDIO
28,00 €

This is a SMD BLE module used in our BLE Bee and Xadow BLE. It is based on TI cc2541 chip, enables robust network nodes to be built with low total bill-of-material costs and highly suited for ultralow power consumption systems. The module is small an...

ID-Nummer: 402/
Auf Lager: NEIN
Marke: SEEED STUDIO
17,31 €

This is a half size breadboard, good for small projects. It"s 8.2 cm x 5.3 cm with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 3.5cm  and ...

ID-Nummer: 839/2
Auf Lager: JA
Marke: SEEED STUDIO
7,72 €

Breadboard jumper wire 70pcs pack. Including 4 different length:200mm,165mm,125mm and 80mm.Perfect design for breadboard,you can use it over and over again!    ...

ID-Nummer: 325/1
Auf Lager: JA
Marke: SEEED STUDIO
6,71 €

    - Based on the OpenWrt Linux distribution, MT7688 - Upgrade version - Integrates more frequently-used ports - Grove modules compatible - Rich Application IoT devices for smart house.     Description   Breakout for LinkIt ...

ID-Nummer: 1603/28
Auf Lager: JA
Marke: SEEED STUDIO
21,41 €

  Camera Shield is the first shield board that support photograph, it is based on the solution of VC0706 + OV7725, the former is a high performance camera processor with enhanced image processing functions and it embedded the hard-wired JPEG cod...

ID-Nummer: 543/29
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
35,99 €

  This is conductive stainless steel sewing thread. It"s very thin, strong, smooth that is suited to build wearable products.   Stainless steel fiber yarn has its ability in thermal resistant up to 1300 degrees, and these spun yarn can ...

ID-Nummer: 452/
Auf Lager: JA
Marke: SEEED STUDIO
4,92 €

Introduction :   The Crazyflie 2.0 is a versatile flying development platform that only weights 27g and fits in the palm of your hand. It"s advanced functionalities makes it ideal for developers and the Bluetooth LE capabilities makes it e...

ID-Nummer: 679/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
225,70 €

    Description   Spare counter rotating propellers for the Crazyflie Nano Quadcopter.          Specification:   - Size: 45 mm   - Fits shaft: 0.8 mm      Part List:   - 4 x CW pro...

ID-Nummer: 1600/
Auf Lager: JA
Marke: SEEED STUDIO
6,71 €

DSO Touch, is a 2 channels digital pocket size oscilloscope. It is only 10mm thick with an aluminum alloy appearance. How a compact and fashionable tool! The touch screen is 320x240 color display. It support SD card USB flash disk storage and USB cha...

ID-Nummer: 686/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
193,98 €

Mainly used in robot platform and car provide power, Good quality and long lifetime, high torque and low noise. It"s running at 107RPM.   Specifications: - Rated Voltage: DC 12V - No load speed: 107RPM - No Load Current: 60mA - load torque: ...

ID-Nummer: 840/
Auf Lager: JA
Marke: SEEED STUDIO
21,05 €

They are used in gas leakage detecting equipments in family and industry, are suitable for detecting of LPG, natural gas , town gas, avoid the noise of alcohol and cooking fumes and cigarette smoke.   Features  - High sensitivity to LPG, na...

ID-Nummer: 643/10
Auf Lager: JA
Marke: SEEED STUDIO
4,88 €

Mainly used in air conditioner louver, small cooling and heating fan etc. Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95.   Features  - On-board ULN2003A chipset - On-board 4-way indicator l...

ID-Nummer: 832/
Auf Lager: NEIN
Lieferung: 14 Tage
Marke: SEEED STUDIO
9,67 €

      - Compatible with standard Arduino and Arduino Mega - Selectable interface between hardware serial port and software serial port - Quad band support: 850/900/1800/1900MHz - Support TCP/UDP protocols - Full control via AT commands...

ID-Nummer: 495/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
80,39 €

3-Axis Compass module, a member of grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° t...

ID-Nummer: 598/10
Auf Lager: NEIN
Marke: SEEED STUDIO
18,29 €

  The Grove 6 – Axis Accelerometer&Compass v2 has 3 magnetic field channels and 3 acceleration channels, and 16-bit data output. It can be used easy with micro controller via I2C or SPI port.  This sensor can be configured to gene...

ID-Nummer: 1565/10
Auf Lager: JA
Marke: SEEED STUDIO
26,71 €

Features - High-cost performance: long-term stability & low power consumption - High sensitivity - Tiny outline - Responsive to a wide scope of target gases - Compatible with 5V and 3.3V, can be used with Arduino and Raspberry Pi   Descripti...

ID-Nummer: 1874/10
Auf Lager: JA
Marke: SEEED STUDIO
13,88 €

Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector.   Specifications Power requirements: 5 VDC @ ~120 mA (heater on) Detection Gas: Alcohol C...

ID-Nummer: 564/10
Auf Lager: JA
Marke: SEEED STUDIO
9,64 €

This Grove - Barometer (High-Accuracy) Sensor features a HP206C high-accuracy chip to detect barometric pressure ,Altimeter and temperature. It can widely measure pressure ranging from 300mbar~1200mbar, with a super high accuracy of 0.01mbar(0.1m) in...

ID-Nummer: 1885/10
Auf Lager: JA
Marke: SEEED STUDIO
27,30 €

  This is a Grove module for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-r...

ID-Nummer: 463/10
Auf Lager: JA, 7 Stk.
Marke: SEEED STUDIO
19,57 €

What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back so that you...

ID-Nummer: 645/9
Auf Lager: JA
Marke: SEEED STUDIO
3,11 €

Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the...

ID-Nummer: 603/10
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
19,51 €

Heart rate ear clip kit contain a ear clip and a receiver module. The heart rate measure kit can be used to monitor heart rate of patient and athlete. The result can be displayed on a screen via the serial port and can be saved for analysis. The enti...

ID-Nummer: 445/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
17,31 €

The Fingerprint Sensor is one optical fingerprint sensor which will make adding fingerprint detection and verification super simple.There"s a high powered DSP chip AS601 that does the image rendering, calculation, feature-finding and searching. Y...

ID-Nummer: 450/10
Auf Lager: JA
Marke: SEEED STUDIO
70,02 €

Grove - FM Receiver is a wideband FM receiver module,this module is base on SX6119,it can offers true single-chip voice FM receiver,which is built-in amplifier,VCO,filter and demodulator. The multifunction button provides greater convenience for user...

ID-Nummer: 639/10
Auf Lager: JA
Marke: SEEED STUDIO
13,36 €

The Grove - Gas Sensor(MQ2) module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke and so on. Based on its fast response time. measurements can be taken as soon as possible. Al...

ID-Nummer: 641/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
9,70 €

The Grove - Gas Sensor module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke and so on. Measurements can be taken as soon as possible based on its fast response time. Also the...

ID-Nummer: 642/10
Auf Lager: JA
Marke: SEEED STUDIO
10,92 €

Grove-Gas Sensor (O₂) is a kind of sensor to test the oxygen concentration in air, which is based on the principle of the electrochemical cell to the original work. You can know clearly the current oxygen concentration when you output voltage value...

ID-Nummer: 640/
Auf Lager: NEIN
Lieferung: 14 Tage
Marke: SEEED STUDIO
74,42 €

    This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial communication configuration. It features 22 tracking / 66 acquisition channel GPS receiver. The sensitivit...

ID-Nummer: 464/10
Auf Lager: JA
Marke: SEEED STUDIO
41,96 €

    The Grove – Mini I2C motor driver is a very tiny motor driver with I2C interface, and it includes two motor driver chips - DRV8830, which helps you control two DC motors or winding of stepper motors on a small board simultaneously...

ID-Nummer: 1563/
Auf Lager: JA
Marke: SEEED STUDIO
14,63 €

Grove - LCD RGB Backlight is a full-color backlight 16x2 LCD. High contrast and ease of use make it a perfect I2C LCD display for Arduino and Raspberry Pi.   The traditional 1602 LCD requires up to 10 I/O pins to display, and the 1602 LCD with R...

ID-Nummer: 1897/10
Auf Lager: JA
Marke: SEEED STUDIO
18,24 €

The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment. The resistance of the sensor decreases when the light intensity of the environment increases. The chip LM358 is used as a voltage follower to enab...

ID-Nummer: 644/10
Auf Lager: JA
Marke: SEEED STUDIO
4,82 €

This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The sensor is a double-ended type and may be actuat...

ID-Nummer: 595/10
Auf Lager: JA
Marke: SEEED STUDIO
4,45 €

    TheGrove - Moisture Sensor can be used to detect the moisture of soil, to judge if there is dampness around the sensor. It can be used to decide if the plants in a garden need watering. It can be used in gardens to automate watering pla...

ID-Nummer: 1560/10
Auf Lager: JA
Marke: SEEED STUDIO
6,58 €

This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden reach out for human help. They can be very to use, just insert it into the soil and then read it. With help of...

ID-Nummer: 453/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
6,88 €

  This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone moves in its detecting range, the sensor outputs HIGH on its SIG pin.     The detecting range and...

ID-Nummer: 480/10
Auf Lager: JA
Marke: SEEED STUDIO
12,49 €

    The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards. When set to HIGH, the LED will light up and the relay will close allowing current ...

ID-Nummer: 1559/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
14,63 €

The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year information. The end of ...

ID-Nummer: 594/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
8,48 €

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.   Features ...

ID-Nummer: 596/10
Auf Lager: JA
Marke: SEEED STUDIO
6,09 €

    TheSPDT Relay(30A) is a high quality Single Pole Double Throw Relay(SPDT).The Relay consist of a coil, 1 common terminal, 1 normally closed(NC) terminal and one normally open(NO) terminal. When the coil of the relay is at rest (not ener...

ID-Nummer: 1558/25
Auf Lager: JA
Marke: SEEED STUDIO
13,29 €

      Product details   Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then y...

ID-Nummer: 1537/13
Auf Lager: JA
Marke: SEEED STUDIO
73,05 €

    DESCRIPTION   Summer is coming, want to make a UV detector to know the UV index when you are under the sun? Grove - Sunlight Sensor is recommend here.   Grove - Sunlight Sensor is a multi-channel digital light sensor, which ha...

ID-Nummer: 1549/10
Auf Lager: JA
Marke: SEEED STUDIO
13,88 €

    This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It ha...

ID-Nummer: 462/10
Auf Lager: JA
Marke: SEEED STUDIO
8,28 €

Grove - Temperature&Humidity Sensor (HDC1000) utilizes a HDC1000 sensor, which was designed by Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. T...

ID-Nummer: 1904/10
Auf Lager: JA
Marke: SEEED STUDIO
22,73 €

Grove - Temperature&Humidity Sensor (HDC1000) utilizes a HDC1000 sensor, which was designed by Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. T...

ID-Nummer: 1886/10
Auf Lager: JA
Marke: SEEED STUDIO
22,73 €

    Product details   This is a multifunctional sensor that gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor that can meet measurement needs of general purposes. It provides reliable r...

ID-Nummer: 1341/10
Auf Lager: JA
Marke: SEEED STUDIO
15,43 €

This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. This is t...

ID-Nummer: 597/10
Auf Lager: JA
Marke: SEEED STUDIO
4,87 €

  Grove - UART WiFi is a serial transceiver module featuring the ubiquitous ESP8266 IoT SoC. With integrated TCP/IP protocol stack, this module lets your microcontroller interact with WiFi networks with only a few lines of code. Each ESP8266 mod...

ID-Nummer: 1564/10
Auf Lager: JA
Marke: SEEED STUDIO
18,65 €

This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It’s designed for easy modular project usage with industrial performance. There is also the electronic version of this module h...

ID-Nummer: 842/10
Auf Lager: JA
Marke: SEEED STUDIO
20,91 €

    Description   The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different lengt...

ID-Nummer: 1601/
Auf Lager: JA
Marke: SEEED STUDIO
3,90 €

The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm, ...

ID-Nummer: 1899/3
Auf Lager: JA
Marke: SEEED STUDIO
3,98 €

It is consist one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It is very easy to drive and Grove compatible. Can be used in toys and cell phone modules.     For all Grove users (e...

ID-Nummer: 699/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
4,06 €

    Grove & ndash; LED Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. It can be used as a indicator for remaining battery life, voltage, water level, music volume or other values that require a gradie...

ID-Nummer: 1562/10
Auf Lager: JA
Marke: SEEED STUDIO
5,23 €

Grove Starter Kit for Photon is an easy to use plug-and-play kit for the Photon - one base shield lets you connect a variety of included Grove modules.It includes a Grove Shield for Photon and several Groves, Grove Shield for Photon is an expansion b...

ID-Nummer: 604/
Auf Lager: JA
Marke: SEEED STUDIO
69,42 €

The GrovePi Zero makes electronics prototyping with the Raspberry Pi Zero easy and fast. The powerful little Raspberry Pi Zero is just waiting for you to release your maker creativity and build the projects you’re passionate about. With the Gro...

ID-Nummer: 1833/7
Auf Lager: JA, 2 Stk.
Marke: SEEED STUDIO
34,95 €

  - Strongest starter kit for Raspberry Pi - Rich grove modules and cables - Compatible with Linux and Win 10 IoT. - CE certified     What is GrovePi+ Start kit for Raspberry Pi?   Carrying a GrovePi+ board together with 12 carefu...

ID-Nummer: 1557/30
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
121,94 €

    GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry model 2 B/B+ and A+ perfectly.    GrovePi+ is an easy-to-use and modular sys...

ID-Nummer: 499/30
Auf Lager: JA
Marke: SEEED STUDIO
40,25 €

    - Co-design by Seeed and MTK - Media Tek MT7688 - Generous memory and storage - Python, Node.js and C as option - MediaTek Labs site surpport     Description         The Linklt Smart 7688 development platf...

ID-Nummer: 1602/28
Auf Lager: JA
Marke: SEEED STUDIO
17,32 €

Easily attach to doors with screw holes.   Referred article:  Window Magnet Contact - (use with Arduino)...

ID-Nummer: 451/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
2,95 €

This is a mini passive infrared sensor that it can sense movement of people, animals, or other objects. It features high sensitivity and instant reaction, commonly be used in burglar alarms and automatically-activated lighting systems.   Feature...

ID-Nummer: 841/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
8,28 €

    Specifications Screen- OLED USB Port- Micro USB Power Port-  DC5525 Operating Part Dimensions-Length: 96mm, Diameter: 16.5mm Heating Part Dimensions- Length: 33mm, Diameter: 5.5mm Weight- 33g (power adaptor n...

ID-Nummer: 687/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
129,31 €

This mini vibration motor worked at 3V can be used for multiple purposes.   Specification:   ...

ID-Nummer: 692/48
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
1,68 €

This mini vibration motor worked at 3V can be used for multipurposes.   Specification:   Operating condition      Item                               &...

ID-Nummer: 693/48
Auf Lager: JA
Marke: SEEED STUDIO
1,68 €
SALE

    The Grove - Mixer Pack is stand-alone,Lego-like electronic.The Mixer Pack consists of 13 mini modules,there are Power,Logic,Sensors and Actuators, It is a group of Grove compatible modules designed for quickly building functional protot...

ID-Nummer: 465/30
Auf Lager: JA
Marke: SEEED STUDIO
68,75 €     55,00 €
Rabatt: 20 %

    Time to build your real-time MIDI instrument/music player! The Music Shield is an audio encoder/decoder compatible with Arduino, Seeeduino, Seeeduino Mega and Arduino Mega. It is based on the VS1053B chip, which enabled it to play sound...

ID-Nummer: 496/29
Auf Lager: JA
Marke: SEEED STUDIO
38,59 €

This is Neodymium magnetic motor, High quality commutator and bigger brushs. With large output force and high speed, very suitable for making aircraft Model.   Specification: - Diameter: 10mm  - Length: 12mm - Shaft length: 6mm - Shaft di...

ID-Nummer: 698/
Auf Lager: NEIN
Marke: SEEED STUDIO
2,73 €

      Short for Near Field Communication, NFC is a widely used technology around SeedStudio. It"s behind daily applications such as access control system and mobile payment system. NFC Shield features a highly integrated transceive...

ID-Nummer: 497/
Auf Lager: NEIN
Marke: SEEED STUDIO
41,39 €

This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. These are the same tweezer-clips used on two leads of the Bus Pirate probe cable. Each cable connects 8 of the 16 buffer...

ID-Nummer: 571/3
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
7,32 €

Grove Base Shield for Photon is an expansion board which incorporated the standard Grove interfaces to let you build more powerful and intelligent applications with richer and cost-effective Grove functional modules. It gets three digital ports, two ...

ID-Nummer: 688/
Auf Lager: JA, 2 Stk.
Marke: SEEED STUDIO
9,70 €

PIR (Passive Infrared Detection)are used to detect motion of human movement. This version has a large lens which can support long range and wide angle. 2.54mm standard connector is easy to fix it anywhere.   Features: - Long range - Wide ang...

ID-Nummer: 387/10
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
12,19 €

  Prototype Shield for Raspberry Pi is a prototype board that you can combine your raspberry pi with other components, modules. As a prototype board, it also provides power and state indicator light. Besides, this product has a mini breadborad. ...

ID-Nummer: 459/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
12,26 €

Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that you can combine your raspberry pi with other components, modules. As a prototype board, it also provides power, state indicator light, button and universal transistor, such as NPN...

ID-Nummer: 585/
Auf Lager: NEIN
Lieferung: 14 Tage
Marke: SEEED STUDIO
14,58 €

Introduction:   He Serial Por module is specifically designed for Raspberry Pi. The module use Maxim MAX232 chip and DB9 port. So the user don’t need to connect Dupont Line and that avoid wrong wiring. User can use this module to debug Ras...

ID-Nummer: 446/23
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
9,75 €

The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by IIC bus. Standardize...

ID-Nummer: 592/23
Auf Lager: JA
Marke: SEEED STUDIO
30,44 €

Raspberry Pi RS232 Board v1.0 is a standard communication port for industry equipment.This module is base on MAX3232,which is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V...

ID-Nummer: 593/23
Auf Lager: JA
Marke: SEEED STUDIO
18,00 €

    Description   The RTC module is specifically designed for Raspberry Pi. It communicated with Raspberry Pi through I2C bus. There is a Maxim DS1307 and CR1220 button cell on the board to keep the real time for a long time after the ...

ID-Nummer: 1782/23
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
11,13 €

The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by Arduino’s Digi...

ID-Nummer: 757/29
Auf Lager: JA
Marke: SEEED STUDIO
24,40 €

  RePhone Kit Create is an open source modular phone kit that changes the way we put our phone into use. It provides a new form of phone customization, and the easiest solution to wearable/IoT development.  With Rephone you can create your...

ID-Nummer: 689/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
67,77 €

                      Documents - User manual - Introduction and Datasheet    ...

ID-Nummer: 680/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
486,78 €

  RS232 Shield is a standard communication port for industry equipment.This module is base on MAX232,which is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Th...

ID-Nummer: 455/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
18,24 €

The RS232 to TTL converter module is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade. It can be used to program STC MCU, NXP MCU,Renesas MCU, STM32 MCU, N+-2EC MCU...

ID-Nummer: 1048/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
4,25 €

7 Pin keyboard scan, ready to go and super slim. The keyboard is 60.0mm x 76.5mm, the flat cable is 90.0mm long, with 15mm 7pin connector....

ID-Nummer: 833/9
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
4,89 €

8 Pin keyboard scan, ready to go and super slim.  ...

ID-Nummer: 428/
Auf Lager: JA
Marke: SEEED STUDIO
11,53 €

Seeeduino Lite shares many similarities with Arduino Leonardo. It is a microcontroller board based on Atmega32U4 chip. The chip has about the same amount of flash, RAM and capability as the ATmega328 found in the Seeeduino. It has 20 digital I/Os (7 ...

ID-Nummer: 389/
Auf Lager: JA, 2 Stk.
Marke: SEEED STUDIO
22,68 €

Seeeduino Lotus is an ATMEGA328 Microcontroller development board. It is a combination of Seeeduino and Base Shield. It used Atmel ATMEGA328P-MU and CH340. ATMEGA328P-MU is a high performance, low power AVR 8-Bit Microcontroller. CH340 is an USB bus ...

ID-Nummer: 391/
Auf Lager: JA
Marke: SEEED STUDIO
23,49 €

In the pursuit for small form factor, flexibility and functionality comes Seeeduino Mega – derived from Arduino Mega it harnesses the power of ATmega2560 to spice up your project building experience.   Features - ATmega 2560 @ 16MHz - Sele...

ID-Nummer: 390/
Auf Lager: JA
Marke: SEEED STUDIO
57,71 €

Seeeduino Stalker v3 is an Arduino compatible main board which has various functions. It"s an X-Bee carrier board while using with X-Bee modules, such as GPS Bee, Bluetooth Bee and Wifi Bee, etc. It"s a charger for Lipo while plugging a solar...

ID-Nummer: 392/
Auf Lager: JA, 2 Stk.
Marke: SEEED STUDIO
52,34 €

Seeeduino V4.2 is an Arduino-compatible board, which is based on Atemga328P MCU. There"re so many Arduinos and Arduino-compatible boards in the world, and we think that Seeeduino V4.2 is one of the best Arduinos, Seeeduino V4.2 is much more stabl...

ID-Nummer: 602/
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
24,39 €

Small size and high torque, Mainly used in air conditioner louver, small cooling heating fan and Automatic curtains etc.   Specification: - Phase: 4 - Step Angle: 5.625°/32 - Ratio: 1/32 - Voltage: 5V DC - Resistance: 25ohm - Idle In-traction...

ID-Nummer: 697/
Auf Lager: JA
Marke: SEEED STUDIO
6,31 €

Moisture and temperature of soil are two main concerns in agricultural area. This sensor is prepared for applications that require precise monitoring over moisture and temperature conditions. The SHT11 sensor inside brings satisfying high resolution....

ID-Nummer: 448/10
Auf Lager: JA, 4 Stk.
Marke: SEEED STUDIO
55,99 €

It mainly used in mechanical motion control, Like CNC milling machine, laser cutter, 3D printer, it also can used in robot platform motion control.     Specification: - Phase: 2 - Step Angle: 1.8°           &nbs...

ID-Nummer: 696/
Auf Lager: NEIN
Marke: SEEED STUDIO
20,34 €

  This is a Temperature sensor , it design for Raspberry Pi, but it also can be used to Arduino.   Pluging it into Raspberry Pi GPIO interface, and all is ok. This is the easiest way to know the current time     Features:   -...

ID-Nummer: 430/
Auf Lager: NEIN
Marke: SEEED STUDIO
11,09 €

    An 80mm button?! Red, Demonic and eyecatching!   With 12V/3W LED inside, this devil is totally rocking in the darkness.             - Button diameter: 80mm - Shell diameter: 98mm - Mounted Height fro...

ID-Nummer: 457/9
Auf Lager: JA
Marke: SEEED STUDIO
13,90 €

Bread board or toy? Both! Bread board can also be very interesting, just like play with blocks. You can inserted these boards anywhere on its base board to build your circuit, not subject to limitation of traditional bread board. In addition, 6 disti...

ID-Nummer: 324/2
Auf Lager: JA
Marke: SEEED STUDIO
10,60 €

The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PH...

ID-Nummer: 646/29
Auf Lager: NEIN
Lieferung: 7 Tage
Marke: SEEED STUDIO
36,54 €