Filtri

Zadnje ogledano

WIRELESS SD SHIELD, A000065

  • Auf Lager JA, 4 Stk.
  • Marke: ARDUINO
  • ID-Nummer: 582/
19,40 €

The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad.

 

Included on board is a SD card slot. When using the SD Library to access the card, Pin 4 is CS and cannot be used otherwise. SPI also relies on pins 11, 12, and 13 for communication.

 

An on-board switch allows the wireless module to communicate with the USB-to-serial converter or with the microntroller.

 

Schematic

EAGLE files: arduino_WirelessShield_SD_v3-reference-design.zip

Schematic: arduino_WirelessShield_SD_v3-schematic.pdf

 

Links:

Product page

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.