Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
DESCRIPTION
Build your own cellular project and get off the grid with FONA. This pack comes with an uFL-antenna type FONA and paired with hand-picked accessories. It's the Adafruit FONA - uFL Starter Pack.
The FONA miniGSM is an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package.
This module measures only 1.75"x1.25" but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (adafruit use the latest SIM800) the size of a postage stamp. This module can do just about everything. This starter pack has a uFL connector. For the SMA version, click here! And for the Adafruit FONA 800 uFL Shield version click here!
- Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
- Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well)
- PWM/Buzzer vibrational motor control
- AT command interface with "auto baud" detection
Sounds delicious, right? So adafruit plated this fine module onto a little breakout with all the extras you need to make your next project shine:
- Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
- Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with mic
- Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
On its own, this module can't do anything. It requires a microcontroller to drive it! Adafruit suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins.
Microcontroller not included! Adafruit recommend an Arduino UNO to go along SIM card not included! If you are in the USA, we recommend TING.
This Pack Contains:
- 1x Adafruit FONA - Mini Cellular GSM Breakout uFL Version - v1- 1x Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL
- 1x Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL
- 1x Lithium Ion Polymer Battery - 3.7v 1200mAh
- 1x Mini Metal Speaker w/ Wires - 8 ohm 0.5W
- 1x Wired Miniature Electret Microphone
- 1x Cell-phone TRRS Headset - Earbud Headphones w/ Microphone
- 1x Vibrating Mini Motor Disc
TECHNICAL DETAILS
This Pack Contains:
- 1x Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL
- 1x Mini Metal Speaker w/ Wires - 8 ohm 0.5W
- 1x Vibrating Mini Motor Disc
- 1x Adafruit FONA - Mini Cellular GSM Breakout uFL Version - v1
- 1x Lithium Ion Polymer Battery - 3.7v 1200mAh
- 1x Wired Miniature Electret Microphone
- 1x Cell-phone TRRS Headset - Earbud Headphones w/ Microphone
Datasheets:
- FCC TCB