Filtri

Zadnje ogledano

1.75MM TRANSLUCENT ABS 3D PRINTER FILAMENT, 150G, RS PRO, 832-0680

  • Auf Lager NEIN
  • Lieferung 3 Tage
  • Marke: RS PRO
  • ID-Nummer: 1683/
13,79 €

 

 

Product Details

 

RS 3D Printer Filament Translucent Sample Pack

 

M-ABS is a transparent ABS filament, so strong, durable and impact resistant. Due to the low percentage of butadiene in M-ABS this filament smells much less unpleasant than ABS, and, moreover, also shows less warping. 

The M-ABS polymer is inherently less impact resistant than ABS, but slightly modified our M-ABS filament is still approx. 3 times more impact resistant than any regular PLA in the market. The transparency of the polymer makes it also possible to manufacture deep opaque colours, if desired

 

- Package contains 1 x 50 gram GLASSBEND clear, M-ABS in transparent red and transparent blue

- Not the unpleasant smell of ABS

- High impact M-ABS

- Good chemical resistance

- Less warping than ABS

- GLASSBEND is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications

- 92% light transmission, so very bright

- Strong and flexible

- Very good interlayer adhesion

- No ’wit-print’ at bow

- Food Contact Acceptable

- Almost no "warping"

 

Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend

 

 

3D Printer Filament

 

 

Documents:

 

- Glassbend Data Sheet

- RS Pro Datasheet

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.