Filtri

Zadnje ogledano

GROVE - SPDT RELAY(30A), SEEED 103020012

13,29 €

TheSPDT Relay(30A) is a high quality Single Pole Double Throw Relay(SPDT).The Relay consist of a coil, 1 common terminal, 1 normally closed(NC) terminal and one normally open(NO) terminal. When the coil of the relay is at rest (not energized), the common terminal and the normally closed terminal have continuity. When the coil is energized, the common terminal and the normally open terminal have continuity. This relay's coil is rated up to 5V and the contact is rated up to 30A (@250VAC, 30VDC). Use it to control AC appliances or high current DC devices.

For all Grove users (especially beginners), Seed studio provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.

NOTE: Please exercise great care and safety precautions when working with mains voltages. If in doubt, contact a professional such as a licensed electrician for help.

 

KEY FEATURES:

 - Grove interface compatible

 - High Switching Current

 - SPDT Relay

 - Arduino library ready

  - Normally closed relay


TECHNICAL SPECIFICATIONS:

 - Operating voltage: 4.75V~5.25V

 - Operating current: 185mA

 - Switching Voltage: 250VAC/30VDC

 - Switching Current: 30A

 - Pull-In Voltage(Max): 3.75VDC

 - Switch on Time(Max): 15ms

 - Release Time(Max): 10ms

 - Operating Ambient Temperature: -25~70°C


DOCUMENTS:

Please visit Seeed studio WiKi page for more information about this product. For technical support, please post your questions on their Forum.

 

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.